How to Install LED Strip Lighting Within Cabinet

[yunaoled]

Under-cabinet lighting in kitchen areas is definitely an affordable method to provide additional illumination for that counter top. Additionally, it produces a comfortable night time ambiance for that beauty from the kitchen. One sort of under-cabinet lights are Flexible LED Strip. These lights seem like lengthy bars that plug into one another and just mount underneath the cabinet. The key to cellular phone process is planning the lighting layout.

1

To research the kitchen walls and identify all the available electrical shops. Should you have only one, then start your installation there. For those who have multiple shops, choose which one you need to use for that LED lights. Typically, you'll use the opening farthest left or right from the cabinets.

2

Put the AC plug directly underneath the selected electrical socket, but don't hook it up. Stretch another finish from the cord underneath the cabinet and place it in to the plug adapter cable provided using the light package.

3

Extend the adapter cable until it reaches the place where you need to install the very first 5050 SMD LED Strip, and plug the finish from the cable in to the outlet on among the light strips.

4

Attach additional light strips towards the finish of the first simply by nipping the finish fittings together. Continue hooking up light strips before you achieve another finish from the cabinets.

5

Walk to 1 finish from the cabinets and put a obvious mounting clip underneath the front edge roughly two to three inches in the front. The flat back from the clip should face your cabinet, and also the two sides hang lower, permitting these to hold the light bar. Make use of a screwdriver to place a screw with the center hole within the clip to secure it.

6

Install additional mounting clips underneath the cabinet very much the same as referred to in Step Five, spacing them one foot apart.

7

Get the very first LED light bar at one finish from the cabinets and put it underneath the cabinet using the lights facing lower. Press it firmly in to the mounting clips to keep it in position. Do this again to snap the rest of the light bars in to the remaining mounting clips.

8

Plug the electrical plug in to the outlet and try out the light strips.

Tips & Alerts

For those who have a gap within the installation area, like a drain without any cabinet, take away the light strip within this location and change it by having an LED light bar extension cable. The cable is thin, and you will easily wrap it around a window frame or run it along the top backsplash to disguise it.